DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase

DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase Review

DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase Feature

• Quality glue-ups time after time. DELTA-inchs 6-inch professional jointer makes it easy with a 1 hp motor, rack and pinion fence system, three-knife cutterhead and easy-to-position infeed table.
• Three-knife cutterhead creates 14,400 cuts per minute
• Adjustable infeed table features an easy lever operation
• Measures 46 by 28.5 by 48.5 inches; weighs 225 pounds
• Jointer includes an induction motor, enclosed stand, center-mounted fence, three-knife cutterhead, dust collector, and push blocks

DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase Overview

Whether you’re shopping for your very first jointer for your home workshop or your third for your professional shop, we think Delta’s X5 is an excellent choice.

Its price tag comes in under many of its competitors, but the quality is still top-notch, and Delta didn’t skimp on the features, our favorite of which is the fence’s ability to tilt both left and right. If you’re cutting just a slight bevel, it doesn’t really matter which way the fence is angled. But for bigger angles, it’s tricky to keep your workpiece against the fence. Delta’s solution: Tilt the fence toward the cutterhead and flip your workpiece so it fits snugly into the lesser angle. Beauty!

We weren’t sure we’d like a lever as opposed to a good old handwheel for infeed table height adjustments, but it’s easy to operate and gave us precise adjustments. Rabbeting, tapering, edge and face jointing are all a pleasure to perform on the X5. Results were smooth and snipe-free, thanks to the three-knife cutterhead that was set perfectly right from the carton. With a 4800 rpm, you’re making 14,400 cuts a minute.

The X5’s capacities exceeded our expectations with a max width of 6-1/8 inches and a max depth pass of 1/8 inch. The table’s length is just shy of four feet, and we felt comfortable with workpieces as long as eight feet. The fence has positive stops at 45 and 90 degrees, and adjustment is quick and easy should you find them out of alignment.

Assembly took about 90 minutes, and that included swabbing off the generous grease Delta applied for shipping. This machine’s no lightweight at 225 pounds, so enlist a buddy’s help when you’re ready to set it up.

As jointers go, this one’s pleasantly quiet, plenty powerful and solid as a rock.--Kris Jensen-Van Heste

DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase Specifications

The DELTA 37-275X X5 professional 6-inch jointer includes a 1-horsepower motor and dual-sided tilt that easily handles your tough rabbeting, edge, face, and tapering jointing projects. The jointer features a three-knife cutterhead that works smoothly at 4,800 RPM to create 14,400-cuts per minute. The table comes in at just under four-feet long with a fence featuring positive stops at 45- and 90-degrees. The adjustable infeed table is controlled by lever rather than handwheel. The jointer operates with a maximum width of 6-1/8-inches and a depth capacity of 1/8-inch. The six-inch jointer comes with an induction motor, enclosed stand, center-mounted fence, three-knife cutterhead, dust collector, and push blocks.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: May 02, 2011 04:00:28